Removal and refitting of rear bumper

REMOVAL AND REFITTING

• Unclip the rear end of the trim panel (1) from the rear wheel arch.
• On each side, remove the screw (2) (Fig. 70).

Fig. 70

• Remove the covers (3), then the screws behind them.
• Remove the bolts (4).
• With the help of a second technician, unclip the bumper from the side guides and remove it.
• Disconnect the connector of the parking sensors.

When refitting, take care to align the bumper correctly with the side guides.

Rear bumper

1. 1
   Rear bumper
2. 2
   Side guides
3. 3
   Loading sill
4. 4
   Towing hook cover
5. 5
   Cover
6. 6
   Guards
7. 7
   Exhaust outlet trim
8. 8
   Wheel arch liners
9. 9
   Parking sensor
10. 10
    Wiring harness
11. 11
    Parking sensor cover
12. 12
    Lower trim.