Front bumper removal and refitting

REMOVAL AND REFITTING

• Open the bonnet.
• Remove the screws (1) (Fig.1).
• Remove (Fig.2):

• the bolts (2),
• the clips (3).

• On each side:

• remove the clips (4) (Fig.3),
• remove the front part of the front wheel arch liners,
• remove the screw (5) (Fig.4),
• pivot the bracket (6) inwards, then remove it.

Fig. 1

Fig. 2

Fig. 3

Fig. 4

• Disconnect the various electrical connectors attached to the bumper.
• With the help of a second person, pull the bumper out of the side guides.
• Remove the bumper.

When refitting, take care to align the bumper correctly with the side guides.

Front bumper and fender

1. 1
   Front bumper
2. 2
   Lower side spoilers
3. 3
   Towing hook cover
4. 4
   Fog lamp trim
5. 5
   Headlamp washer cover
6. 6
   Grille
7. 7
   Radiator grille
8. 8
   Badge
9. 9
   Underbody cover
10. 10
    Foam
11. 11
    Bracket
12. 12
    Wheel arch liners
13. 13
    Front fender
14. 14
    Cover
15. 15
    Bracket.