Cruise Control & Driver Assistance

Additional Service When Replacing Distance Sensor

2steps
~12min
2/5difficulty
Done 0 of 2

Work Procedure

  • Always perform the distance sensor configuration after replacing the distance sensor.

  • Always perform the radar alignment after removing and installing or replacing the distance sensor.

  • Perform the AEB system action test to check that the AEB system operates normally.

DISTANCE SENSOR CONFIGURATION

Perform saving vehicle internal information according to "Replace ECU" in CONSULT Operation Manual.

>>

GO TO 2.

PERFORM RADAR ALIGNMENT

Perform the radar alignment. Refer to Work Procedure.

>>

GO TO 3.

AEB SYSTEM ACTION TEST

  1. Perform the following system action test.

    • LDW: Refer to Work Procedure.

    • I-LI: Refer to Work Procedure.

    • BSW: Refer to Work Procedure.

    • I-BSI: Refer to Work Procedure.

    • TSR: Refer to Work Procedure.

    • RCTA: Refer to Work Procedure.

    • I-DA: Refer to Work Procedure.

  2. Check that the each system operates normally.

>>

INSPECTION END