Cruise Control & Driver Assistance
Pre-Inspection for Diagnosis
In this manual: Cruise Control & Driver Assistance
~1min read
Work Procedure
CHECK CAMERA LENS AND WINDSHIELD
Are camera lens and windshield contaminated with foreign materials?
YES (When the camera lens is contaminated with foreign materials.)>>Replace front camera unit 【Refer to Removal and Installation (Without ProPILOT Assist 2.1) or Removal and Installation (With ProPILOT Assist 2.1).】 and GO TO 2.
YES (When the windshield is contaminated with foreign materials.)>>Clean windshield.
NO>>GO TO 2.
CHECK FRONT CAMERA UNIT INSTALLATION CONDITION
Check front camera unit installation condition (installation position, properly tightened, a bent bracket).
Is it properly installed?
YES>>GO TO 3.
NO>>Install front camera unit properly, and perform camera aiming.
CHECK vehicle HEIGHT
Check vehicle height. Refer to Wheel Height.
Is vehicle height appropriate?
YES>>INSPECTION END
NO>>Repair vehicle to appropriate height.
Was this page helpful?