Cruise Control & Driver Assistance

Additional Service When Replacing Front Camera Unit

2steps
~12min
2/5difficulty
Done 0 of 2

Work Procedure

  • Always perform the front camera unit configuration after replacing the front camera unit.

  • Always perform the camera aiming after removing and installing or replacing the front camera unit.

FRONT CAMERA UNIT CONFIGURATION

Perform saving vehicle internal information according to "Replace ECU" in CONSULT Operation Manual.

>>

GO TO 2.

CAMERA AIMING ADJUSTMENT

Perform the camera aiming adjustment with CONSULT. Refer to Work Procedure.

>>

GO TO 3.

PERFORM SELF-DIAGNOSIS

Perform the self-diagnosis of front camera unit with CONSULT. Check if any DTC is detected.

Is any DTC detected?

YES>>

Perform the trouble diagnosis for the detected DTC. Refer to DTC Index.

NO>>

GO TO 4.

ACTION TEST

  1. Perform the following system action test.

    • LDW: Refer to Work Procedure.

    • I-LI: Refer to Work Procedure.

    • I-BSI: Refer to Work Procedure.

    • TSR: Refer to Work Procedure.

  2. Check that the each system operates normally.

>>

WORK END