Body Exterior, Doors, Roof & Vehicle Security
Cowl Top
In this manual: Body Exterior, Doors, Roof & Vehicle Security
~1min read
Exploded View

| Cowl top seal | Cowl top side seal | EPT seal [t: 15.0 mm (0.591 in)] | |||
| Cowl top cover | Cowl top clip | EPT seal [t: 3.0 mm (0.118 in)] | |||
| EPT seal [t: 10.0 mm (0.394 in)] | EPT seal [t: 10.0 mm (0.394 in)] | EPT seal [t: 3.0 mm (0.118 in)] | |||
| EPT seal [t: 3.0 mm (0.118 in)] | |||||
| : Clip | |||||
| : Always replace after every disassembly. | |||||
Removal and Installation
REMOVAL
Fully open hood assembly.
Remove front wiper arm (LH and RH). Refer to Removal and Installation.
Remove cowl top side seal.
Disconnect front washer tube connector.
Remove cowl top cover fixing clips and cowl top clips.
Pull forward to release cowl top cover from windshield glass, and then remove cowl top cover.
Remove the following parts after removing cowl top cover.
Cowl top seal
Washer nozzle. Refer to Removal and Installation.
Washer tube. Refer to Removal and Installation.
EPT seal
INSTALLATION
Note the following items, and then install in the reverse order of removal.
Was this page helpful?