Body Exterior, Doors, Roof & Vehicle Security
Front Pillar Finisher
In this manual: Body Exterior, Doors, Roof & Vehicle Security
~1min read
Exploded View

| Grommet | Front pillar finisher | Double-sided tape [t: 2.5 mm (0.098 in)] |
|||
| : Clip | |||||
| : Always replace after every disassembly. | |||||
Removal and Installation
REMOVAL
Fully open front door.
Apply a protective tape (A) on the parts to protect it from damage.

Disengage fixing clips using a remover tool (A).

| : Clip |
Cut double-sided tape using a remover tool and cutter.
Remove front pillar finisher as shown in the figure.

INSTALLATION
Note the following items, and then install in the reverse order of removal.
Was this page helpful?