Body Exterior, Doors, Roof & Vehicle Security
Rear Spoiler
In this manual: Body Exterior, Doors, Roof & Vehicle Security
~1min read
Exploded View

| Grommet | Rear spoiler cover | Rear spoiler | |||
| : Clip | |||||
| : Pawl | |||||
| : Always replace after every disassembly. | |||||
Removal and Installation
REMOVAL
Remove back door trim. Refer to Removal and Installation.
Remove mounting nuts
.

Remove mounting bolts
.

Disconnect rear washer tube C
.

Apply protective tape (A) on the parts to protect it from damage.

Disengage fixing clips using remover tool (A), and then remove rear spoiler.

| : Clip |
Remove the following parts after removing rear spoiler.
Rear spoiler finisher
Remove fixing screws
. .
Disengage fixing pawls, and then remove rear spoiler finisher.


: Pawl
High-mounted stop lamp. Refer to Removal and Installation.
INSTALLATION
Note the following item, and then install in the reverse order of removal.
Was this page helpful?