Body Exterior, Doors, Roof & Vehicle Security
Parting Seal
In this manual: Body Exterior, Doors, Roof & Vehicle Security
~2min read
Exploded View

| Parting seal A | Parting seal B | Parting seal C | |||
Double-sided tape [t: 0.8 mm (0.031 in)] |
Double-sided tape [t: 2.5 mm (0.098 in)] |
||||
| : Clip | |||||
| : vehicle front | |||||
| : Always replace after every disassembly. | |||||
Removal and Installation
REMOVAL
Fully open front door and rear door.
Apply a protective tape (A) on the parts to protect it from damage.

Cut double-sided tapes using a remover tool (A) and cutter (B), and then remove parting seal C.

Remove parting seal B fixing clip
.

Apply a protective tape (A) on the parts to protect it from damage.

Cut double-sided tape using a remover tool (A) and cutter (B), and then remove parting seal B.

Disengage fixing clips and peel off double-sided tapes from vehicle body, and then remove parting seal A.

| : Clip |
INSTALLATION
Note the following items, and then install in the reverse order of removal.

| Body side panel | Parting seal A | Double-sided tape [t: 2.5 mm (0.098 in)] |
|||
| Rib | Edge of parting seal A | Edge of Double-sided tape | |||
| : vehicle front | |||||
| E | : 420.0 mm (16.535 in) |
| F | : 30.0 mm (1.181 in) |
Was this page helpful?