Body Exterior, Doors, Roof & Vehicle Security

Door Sash Cover

~5min read

Exploded View

Front door panel Rear door panel Front door sash cover
Rear door sash cover front Rear door sash cover rear EPT seal [t: 2.0 mm (0.079 in)]

Double-sided tape

[t: 2.5 mm (0.098 in)]

Double-sided tape

[t: 0.8 mm (0.031 in)]
EPT seal [t: 6.0 mm (0.236 in)]
EPT seal [t: 3.0 mm (0.118 in)]

Double-sided tape

[t: 0.8 mm (0.031 in)]
EPT seal [t: 5.0 mm (0.197 in)]

Double-sided tape

[t: 2.5 mm (0.098 in)]

Double-sided tape

[t: 2.0 mm (0.079 in)]

Double-sided tape

[t: 0.8 mm (0.031 in)]
: Pawl
: Always replace after every disassembly.

Front Door Sash Cover

Removal and Installation

REMOVAL

Remove front door outside molding. Refer to Removal and Installation.

Remove front door glass run of upper side. Refer to Removal and Installation.

Remove front door weather-strip of upper side. Refer to Removal and Installation.

Apply protective tapes (A) on the part to protect it from damage.

Disengage fixing pawl using remover tool (A).

: Pawl

Insert a remover tool (A) between front door panel and front door sash cover, and then cut double-sided tape using a cutter (B) while lifting front door sash cover.

Remove front door sash cover.

INSTALLATION

Note the following items, and then install in the reverse order of removal.

Rear Door Sash Cover

Removal and Installation

REMOVAL

Rear Door Sash Cover Front

Remove rear door outside molding. Refer to Removal and Installation.

Remove rear door glass run of upper side. Refer to Removal and Installation.

Remove rear door weather-strip of upper side. Refer to Removal and Installation.

Apply protective tape (A) on the part to protect it from damage.

Disengage fixing pawl using remover tool (A).

: Pawl

Insert a remover tool (A) between rear door panel and rear door sash cover front, and then cut double-sided tape using a cutter (B) while lifting rear door sash cover front.

Remove rear door sash cover front.

Rear Door Sash Cover Rear

Remove rear door outside molding. Refer to Removal and Installation.

Remove rear door glass run of upper side. Refer to Removal and Installation.

Remove rear door weather-strip of upper side. Refer to Removal and Installation.

Apply protective tape (A) on the part to protect it from damage.

Disengage fixing pawl using remover tool (A).

: Pawl

Insert a remover tool (A) between rear door panel and rear door sash cover rear, and then cut double-sided tape using a cutter (B) while lifting rear door sash cover rear.

Remove rear door sash cover rear.

INSTALLATION

Note the following items, and then install in the reverse order of removal.