Transaxle & transmission CVT: RE0F10B
Air breather hose
In this manual: Transaxle & transmission CVT: RE0F10B
~1min read
Removal and Installation
Check air breather hose not collapsed or blocked due to folding or bending when installed.
REMOVAL
1. Remove air cleaner case. Refer to EM-26, "Removal and Installation". 2. Remove clip from bracket.3. Remove air breather hose from transaxle assembly.
INSTALLATION
Note the following, and install in the reverse order of removal.
CAUTION:Check air breather hose not collapsed or blocked due to folding or bending when installed.
• Install air breather hose to air breather tube so that the paint mark (A) faces upward. Also insert hose to the bend of air breather tube.

Was this page helpful?