Transaxle & transmission CVT: RE0F10B
Secondary speed sensor
In this manual: Transaxle & transmission CVT: RE0F10B
~1min read
Exploded View

1. Transaxle assembly 2. Secondary speed sensor 3. O-ring
disassembly.
: N·m (kg-m, in-lb)
: Genuine NISSAN CVT Fluid NS-2
Removal and Installation
REMOVAL
1. Remove air cleaner case. Refer to EM-26, "Removal and Installation". 2. Remove secondary speed sensor connector. 3. Remove secondary speed sensor.4. Remove O-ring from secondary speed sensor.
INSTALLATION
Note the following, and install in the reverse order of removal.
CAUTION:• Never reuse O-ring.
• Apply CVT fluid to O-ring.
Inspection and Adjustment
INSPECTION AFTER INSTALLATION
Check for CVT fluid leakage. Refer to TM-480, "Inspection".
ADJUSTMENT AFTER INSTALLATION
Adjust the CVT fluid level. Refer to TM-379, "Adjustment".
Was this page helpful?