Engine Control System K9K
Engine idle speed too high
In this manual: Engine Control System K9K
~1min read
Description
CHART 5: ENGINE IDLE SPEED TOO HIGH
Diagnosis Procedure
1.CHECK ECM POWER SUPPLY AND GROUND CIRCUITCheck ECM power supply and ground circuit. Refer to EC-885, "Diagnosis Procedure".
Is the inspection result normal? YES >> GO TO 2.
NO >> Repair or replace harness or connector.
2.CHECK WIRING HARNESSVisually check the condition of the engine wiring harness.
Is the inspection result normal? YES >> GO TO 3.
NO >> Repair or replace harness or connector.
3.CHECK ACCELERATOR PEDAL POSITION SENSORCheck the accelerator pedal position sensor. Refer to EC-1001, "Component Inspection".
Is the inspection result normal? YES >> INSPECTION END
NO >> Repair or replace.
Was this page helpful?