Overspeed at idle speed or on releasing brake
Description
CHART 14: OVERSPEED AT IDLE SPEED OR ON RELEASING BRAKE
Diagnosis Procedure
1.CHECK ENGINE OILCheck the grade of engine oil. Refer to LU-33, "Inspection".
Is the inspection result normal? YES >> GO TO 2.
NO >> Replace engine oil. Refer to LU-34, "Refilling".
2.CHECK ENGINE OIL LEVELIs the engine oil level correct? Yes or No Yes >> GO TO 3.
No >> Top up the oil.
3.CHECK ECM POWER SUPPLY AND GROUND CIRCUITCheck ECM power supply and ground circuit. Refer to EC-885, "Diagnosis Procedure".
Is the inspection result normal? YES >> GO TO 4.
NO >> Repair or replace harness or connector.
4.CHECK WIRING HARNESSVisually check the condition of the engine wiring harness.
Is the inspection result normal? YES >> GO TO 5.
NO >> Repair or replace harness or connector.
5.CHECK CAN COMMUNICATIONPerform trouble diagnosis on the CAN communication line using CONSULT-III. Refer to LAN-31, "CAN COMMUNICATION SYSTEM : CAN Communication Signal Chart".
Is the inspection result normal? YES >> GO TO 6.
NO >> Repair or replace harness or connector.
6.CHECK ???ABS ACTUATOR AND ELECTRIC UNIT (CONTROL UNIT)???Perform trouble diagnosis on the ???ABS ACTUATOR AND ELECTRIC UNIT (CONTROL UNIT)???. [Refer to BRC-24, "CONSULT-III Function". (Without ESP), BRC-131, "CONSULT-III Function". (With ESP)] Is the inspection result normal? YES >> INSPECTION END.
NO >> Repair or replace.