Engine Control System K9K
Engine smokes when revved
In this manual: Engine Control System K9K
~1min read
Description
CHART 20: ENGINE SMOKES WHEN REVVED
Diagnosis Procedure
1.CHECK ENGINE OILCheck the grade of engine oil. Refer to LU-25, "Inspection".
Is the inspection result normal? YES >> GO TO 2.
NO >> Replace engine oil. Refer to LU-26, "Refilling".
2.CHECK ENGINE OIL LEVELIs the engine oil level correct? Yes or No Yes >> GO TO 3.
No >> Top up the oil.
3.CHECK ECM POWER SUPPLY AND GROUND CIRCUITCheck ECM power supply and ground circuit. Refer to EC-908, "Component Inspection".
Is the inspection result normal? YES >> GO TO 4.
NO >> Repair or replace harness or connector.
4.CHECK WIRING HARNESSVisually check the condition of the engine wiring harness.
Is the inspection result normal? YES >> GO TO 5.
NO >> Repair or replace harness or connector.
5.CHECK MASS AIR FLOW SENSORCheck mass air flow sensor. Refer to EC-902, "Component Inspection".
Is the inspection result normal? YES >> INSPECTION END
NO >> Repair or replace.
Was this page helpful?