Transaxle & transmissioN CVT: RE0F11A
P0863 TCM communication
In this manual: Transaxle & transmissioN CVT: RE0F11A
~1min read
DTC Logic
DTC DETECTION LOGIC

DTC CONFIRMATION PROCEDURE
1.PREPARATION BEFORE WORKIf another "DTC CONFIRMATION PROCEDURE" occurs just before, turn ignition switch OFF and wait for at least 10 seconds, then perform the next test.
>> GO TO 2.
2.CHECK DTC DETECTION
With CONSULT-III
1. Turn ignition switch ON.
2. Check the DTC.
Is “P0863” detected? YES >> Go to TM-430, "Diagnosis Procedure".
NO >> INSPECTION END
Diagnosis Procedure
1.CHECK INTERMITTENT INCIDNTRefer to GI-42, "Intermittent Incident".
Is the inspection result normal? YES >> Replace the TCM. Refer to TM-490, "Removal and Installation".
NO >> Repair or replace the malfunctioning parts.
Was this page helpful?