S mode indicator
Component Function Check
1.CHECK S MODE INDICATOR FUNCTIONCheck S mode indicator turns ON for approx. 2 seconds when ignition switch turns ON.
Is the inspection results normal? YES >> INSPECTION END
NO >> Go to TM-469, "Diagnosis Procedure".
Diagnosis Procedure
1.CHECK DTC (TCM)
With CONSULT-III
1. Turn ignition switch ON.
2. Check “Self Diagnostic Results” in “TRANSMISSION”.
Is any DTC detected? YES >> Check DTC detected item. Refer to TM-366, "DTC Index".
NO >> GO TO 2.
2.CHECK DTC (COMBINATION METER)
With CONSULT-III
Check “Self Diagnostic Results” in “METER/M&A”.
Is any DTC detected? YES >> Check DTC detected item. Refer to MWI-36, "DTC Index".
NO >> GO TO 3.
3.CHECK COMBINATION METER INPUT SIGNAL
With CONSULT-III
1. Shift the selector lever to “D” position. 2. Select “Data Monitor” in “METER/M&A”. 3. Select “O/D OFF IND”.
4. Check that “O/D OFF IND” turns ON/OFF when S mode switch is operated. Refer to MWI-28, "Reference Value".
Is the inspection result normal? YES >> Replace combination meter. Refer to MWI-69, "Removal and Installation".
NO >> GO TO 4.
4.CHECK TCM INPUT/OUTPUT SIGNAL
With CONSULT-III
1. Select “Data Monitor” in “TRANSMISSION”. 2. Select “SPORT MODE SW”.
3. Check that “SPORT MODE SW” turns ON/OFF when S mode switch is operated. Refer to TM-354, "Reference Value".
Is the inspection result normal? YES >> Replace combination meter. Refer to MWI-69, "Removal and Installation".
NO >> Check S mode switch circuit. Refer to TM-466, "Diagnosis Procedure".