Heating and Ventilation System
Blower Motor
In this manual: Heating and Ventilation System
~1min read
Removal
PROCEDURE
1. Disconnect the battery ground cable.
2. Remove the glove box by removing two screws.
3. Remove the lower panel on the passenger side by removing three screws.
4. Remove the glove box bracket.
5. Disconnect the air duct hoses at the base of the motor housing.
6. Remove the screws and take out the blower motor.
7. Mark the brackets to be disconnected.
Installation
PROCEDURE
Installation is performed in the reverse order. Install the brackets in the marked positions and connect the duct hoses.Test yourself
A quick Nissan Sunny quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?