Nissan Sunny Quiz
Heating and Ventilation System

Blower Motor Resistor

In this manual: Heating and Ventilation System
Owner's Manual — 35Maintenance — 752.0 Liter Gasoline Engine — 36Diesel Engine — 32Cooling System — 11Heating and Ventilation System — 10Fuel and Exhaust System — 154Engine Starting System — 16Clutch — 7Manual transmission — 7Automatic transmission — 9Axle Shafts — 7Brakes — 22Suspension and Steering — 52Electrical System — 30
~1min read

GENERAL INFORMATION

The resistor is installed behind the heater fan motor, in the lower part of the heater housing. Removal

PROCEDURE

1. Disconnect the battery ground cable.

2. Remove the glove box by removing two screws.

3. Remove the fan motor.

4. Disconnect the connector from the resistor.

5. Remove the two screws and remove the resistor.

Installation: Installation is performed in the reverse order.

Test yourself

A quick Nissan Sunny quiz: every answer comes with an explanation and a link to the manual page.