Practical advice
Rear and side lamps (replacing bulbs)
In this manual: Practical advice
2steps
~12min
1/5difficulty
Done 0 of 2
Position/brake lights and turn signal

Open the boot, unscrew screws 1.
The bulbs are pressurised and may burst when being replaced.
Risk of injury.

Pull the outer side A of the light and remove the rear light unit.
Remove the bulb holder by releasing clip 2, then clips 3.
Replace the bulb.
Refit the bulb holder and push the unit fully home until it locks.
Check that the lamp is correctly locked in place.
Tighten screws 1.

- Position and brake light Bulb type: P21/5W.
- Turn signal light Bulb type: PY21.

Third brake light 6
Consult a Renault dealer.
Reversing and rear fog lights 7
As the rear bumper must be removed, consult a Brand Representative.
Number plate lights 8

- Unclip light 8 by pressing tab 9;
- remove the light cover to access the bulb.
Bulb type: W5W.
The bulbs are pressurised and may burst when being replaced.
Risk of injury.
Side repeater lights 10

As the mirror must be removed, consult a Brand Representative.
Bulb type: W5W.
Test yourself
A quick Renault Captur quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?