Front headlamps (replacing bulbs)

Turn indicator light

Turn the bulb holder 1 a quarter turn and remove the bulb.

Bulb type: PY21W.

After refitting the bulb, make sure it is locked in place correctly.

Dipped beam

To change the bulb:

• remove the cover A;
• disconnect the wiring harness 5 (black connector);
• unclip the spring clip 2 and remove the bulb.

Bulb type: H1.

Before working in the engine compartment, be sure to switch off the ignition by pressing the engine stop button (refer to the "Starting and stopping the engine" section in chapter 2).

High beam

To change the bulb:

• remove cover B;
• disconnect wiring harness 4 (black connector);
• unclip spring clip 3 and remove the bulb.

Bulb type: H1.

Be sure to use 55W anti-UV bulbs to avoid degrading the plastic lens of the headlamps.

Do not touch the glass of the bulb.

Hold it by its base.

After replacing the bulb, make sure the cover is correctly refitted.

The bulbs are pressurised and may burst when being replaced.

Risk of injury.

When working near the engine, be aware that it may be hot. The cooling fan may also start at any time.

Risk of injury.

Front position light

To change the bulb, remove cover B.

Pull the bulb holder 6 to access the bulb.

Bulb type: W5W.

When working near the engine, be aware that it may be hot. The cooling fan may also start at any time.

Risk of injury.

Before carrying out any work in the engine compartment, it is essential to switch off the ignition by pressing the engine stop button (refer to the section "starting and stopping the engine" in chapter 2).

Depending on local regulations, or as a precaution, obtain an emergency kit from a Brand Representative containing a set of bulbs and a set of fuses.

The bulbs are pressurised and may burst when being replaced.

Risk of injury.

Daytime running lamps 7

Consult a Renault dealer.

Front fog lamps 8

• Access the bulb holder from underneath the vehicle;
• unclip the cover;
• turn the bulb holder a quarter turn.

Bulb type: H16LL.

Bulb type for vehicles equipped with cornering lights: H11LL.

Auxiliary headlamps

If you wish to fit your vehicle with "fog lights", consult a Brand Representative.

Any work on (or modification of) the electrical system must be carried out by a Brand Representative, who has the parts needed for the adaptation, as an incorrect connection could damage the electrical system (wiring, components, in particular the alternator).