Tools

The tools supplied in the tool holder depend on the vehicle.

Tool holder A is located in the tray under the luggage compartment floor.

Lift the cover, then remove it.

Wheel bolt bag

Storage bag

Supplied in the tool kit, it is used to store the punctured wheel in the luggage compartment.

Wheel brace 1

It is used to lock or unlock the wheel bolts and the towing eye 5.

Jack 2

Fold it correctly before returning it to its housing (make sure to reposition the crank handle correctly).

Wheel trim key 3

It is used to remove the wheel trims.

Wheel bolt guide 4

Used to finish unscrewing or to start screwing in the wheel bolts.

Towing eye 5

Refer to the section "Towing: Breakdown Assistance" in chapter 5.

Lever 6

It is used to tighten or loosen the towing eye 5.

Never leave tools loose in the vehicle: they may be thrown forward during braking. After use, make sure the tools are securely clipped into the tool holder, then place the holder correctly in its compartment: risk of injury.

When wheel bolts are supplied in the tool kit, use these bolts only for the spare wheel: refer to the label on the spare wheel.

The jack is intended for changing a wheel only. It must never be used to carry out a repair or to work underneath the vehicle.