Wheel trims

Trim

Remove it using wheel trim tool 1, engaging the hook in the slot provided:

• near the valve for wheel trim 2;
• around the edge for a centre wheel trim.

To refit wheel trim 2, align it with valve 3. Press in the retaining clips, starting on the valve side at A, then B and C, and finishing on the side opposite the valve at D.

Never
leave tools loose in the vehicle: they may be thrown forward under braking. After use, be sure to return the tools to their holder, then position it correctly in its housing: risk of injury.

When wheel bolts are supplied, use these bolts only for the spare wheel: refer to the label on the spare wheel.

The jack is intended for wheel changes only. It must never be used to carry out a repair or to get under the vehicle.