Tools (Jack - Crank handle...)

The wheel-change tools are located in the luggage compartment under the floor covers.

When storing the tools, be sure to clip the jack in place, base B facing down.

The tools supplied in the tool holder depend on the vehicle.

No object
must be placed on the floor (driver's footwell): in the event of sudden braking, such objects may slide under the pedals and prevent their use.

Jack 1

Fold it back and position tensioner A correctly before refitting it into its housing.

Lever 2

It is used to tighten or loosen tow eye 3.

Tow eye 3

Refer to the section "Towing: Breakdown Assistance" in chapter 5.

Wheel trim tool 4

Used to remove the wheel trims.

Wheel brace 5

Used to loosen and tighten the wheel bolts.

Anti-theft wheel nut

Storage compartments are provided in the holder to hold them.

Never
leave tools loose in the vehicle: they may be thrown forward under braking. After use, be sure to return the tools to their holder, then position it correctly in its housing: risk of injury.

When wheel bolts are supplied, use these bolts only for the spare wheel: refer to the label on the spare wheel.

The jack is intended for wheel changes only. It must never be used to carry out a repair or to get under the vehicle.