Cabin filter

RIGHT-HAND DRIVE

Located in front of the outside air intake, it filters the air and cleans it before it reaches the passenger compartment.

REMOVAL

• Remove the trim located at (1).
• Remove the cabin filter (2).

Note: The rigid parts of the filter must be broken to remove it.

INSTALLATION

• Reverse the removal procedure.

Note:

• The rigid parts of the filter must be broken to make installation easier.
• Take care not to damage the filter element.

LEFT-HAND DRIVE

Located in front of the outside air intake, it filters the air and cleans it before it reaches the passenger compartment.

REMOVAL

• Disconnect the battery, starting with the negative terminal.

• Remove:

• the front sill trim (1),
• the side panel of the dashboard (2).

• Unclip the passenger airbag deactivation switch (3).

• Remove the storage tray mounting screws (4).
• Remove the glovebox.

• Remove:

• the trim (5),
• the two cabin filter screws.

• Remove the cabin filter (6).

INSTALLATION

• Refit in the reverse order of removal.

WARNING

Connect the battery and carry out the necessary relearning procedures (see Electrical Equipment chapter).