Transmission
System operation
In this manual: Transmission
5steps
~30min
2/5difficulty
Done 0 of 5
GENERAL OPERATION
On this vehicle, the automatic gearbox is a DP0, a gearbox already fitted to other Renault vehicles including the Laguna II, Clio II or Kangoo.
The automatic gearbox control unit controls gear changes based on several parameters, including engine torque and the driving mode selected by the driver.
All information to the control unit is wired, except for the information from the injection control unit, which is multiplexed.
The control unit is diagnosed via the K-line.
SYSTEM OPERATION
States of the multifunction switch (CMF):
Note: Switch S1 of the multifunction switch is not connected on this vehicle.Ignore ET154 "Multifunction switches".

States of the pulse lever switch:
Note: This vehicle is not fitted with the forced 3rd gear (D3).Ignore ET155 "Forced third gear contact".

States of the sequence solenoid valves (EVS):

MODULAR CONNECTOR

- Multifunction switch
- Electronic hydraulic interface
- Oil pressure sensor
- Turbine speed sensor
- Converter bypass flow solenoid valve
CONTROL UNIT INPUTS AND OUTPUTS


Test yourself
A quick Renault Megane quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?