Renault Megane Quiz
Bodywork

Rear floor, front section

In this manual: Bodywork
Engine and peripherals — 141Chassis — 79Chassis — 72Renault Mégane III Driver's Manual — 87Electrical equipment — 221Engine and peripherals — 47Electrical equipment — 80Transmission — 14Air conditioning — 30Bodywork — 115Trim and upholstery — 44General vehicle information — 27Air conditioning — 59General vehicle information — 16Transmission — 38Sealing and soundproofing — 7General vehicle information — 3
~1min read

Replacing this part is complementary to replacing the rear side member for a rear impact, or to the rear section of the body side for a rear side impact.

In the method described below, you will only find the descriptions and joins specific to the part concerned.

Information on related parts is covered in their respective sections (see contents).

Note: If the spot welds cannot be made with the spot welder, they may be replaced with plug welds.

REPLACEMENT PART CONTENTS

Part supplied assembled with:
Parcel shelf reinforcement
Rear seat side mounting reinforcement
M10x150 weld nut
Rear section front riser
G 4.8-12 rivet
5-14 CDQ 4-8 weld stud
Handbrake cable routing tube
Front exhaust mounting bracket
M8 swaged nut
Rear cushion retaining crossmember
Passenger retaining crossmember reinforcement
Front fuel tank reinforcement bracket

Plancher arrière partie avant

PARTS CONCERNED (thickness in mm):

  1. Rear floor, front section 0.7

PART IN POSITION

Plancher arrière partie avant

Detail of section a

Plancher arrière partie avant
Plancher arrière partie avant

Test yourself

A quick Renault Megane quiz: every answer comes with an explanation and a link to the manual page.