Renault Megane Quiz
Bodywork

Rear floor centre cross member

In this manual: Bodywork
Engine and peripherals — 141Chassis — 79Chassis — 72Renault Mégane III Driver's Manual — 87Electrical equipment — 221Engine and peripherals — 47Electrical equipment — 80Transmission — 14Air conditioning — 30Bodywork — 115Trim and upholstery — 44General vehicle information — 27Air conditioning — 59General vehicle information — 16Transmission — 38Sealing and soundproofing — 7General vehicle information — 3
3steps
~18min
2/5difficulty
Done 0 of 3

Replacing this part is complementary to replacing the rear side member for a rear or side impact.

In the method described below, you will only find the descriptions and joins specific to the part concerned.

Information on related parts is covered in their respective sections (see contents).

Note: If the spot welds cannot be made with the spot welder, they may be replaced with plug welds.

REPLACEMENT PART CONTENTS

Traverse centrale de plancher arrière

PARTS CONCERNED (thickness in mm):

  1. Rear floor central crossmember 1
  2. Rear floor, front section 0.7
  3. Rear floor fixing bracket, rear section 1

PART IN POSITION

Traverse centrale de plancher arrière
Traverse centrale de plancher arrière

Test yourself

A quick Renault Megane quiz: every answer comes with an explanation and a link to the manual page.