Renault Megane Quiz
Bodywork

Fuel tank mounting bracket

In this manual: Bodywork
Engine and peripherals — 141Chassis — 79Chassis — 72Renault Mégane III Driver's Manual — 87Electrical equipment — 221Engine and peripherals — 47Electrical equipment — 80Transmission — 14Air conditioning — 30Bodywork — 115Trim and upholstery — 44General vehicle information — 27Air conditioning — 59General vehicle information — 16Transmission — 38Sealing and soundproofing — 7General vehicle information — 3
~1min read

Replacing this part is a basic operation for an impact under the vehicle or following damage to the weld nut for fixing the fuel tank.

In the method described below, you will only find the descriptions and joins specific to the part concerned.

Information on related parts is covered in their respective sections (see contents).

Note: If the spot welds cannot be made with the spot welder, they may be replaced with plug welds.

REPLACEMENT PART CONTENTS

Part supplied assembled with: M8 swaged nut

Support de fixation réservoir

PARTS CONCERNED (thickness in mm):

  1. Fuel tank mounting bracket 1.2

PART IN POSITION

Support de fixation réservoir
Note: The exhaust mounting bracket geometry is set using the two rivets, which must be ordered separately from the parts department.

Test yourself

A quick Renault Megane quiz: every answer comes with an explanation and a link to the manual page.