Renault Megane Quiz
Bodywork

Rear bumper beam mounting reinforcement

In this manual: Bodywork
Engine and peripherals — 141Chassis — 79Chassis — 72Renault Mégane III Driver's Manual — 87Electrical equipment — 221Engine and peripherals — 47Electrical equipment — 80Transmission — 14Air conditioning — 30Bodywork — 115Trim and upholstery — 44General vehicle information — 27Air conditioning — 59General vehicle information — 16Transmission — 38Sealing and soundproofing — 7General vehicle information — 3
~1min read

Replacing this part is a complementary operation to replacing the complete rear skirt and the rear side member closure.

In the method described below, you will only find the descriptions and joins specific to the part concerned.

Information on related parts is covered in their respective sections (see contents).

Note: If the spot welds cannot be made with the spot welder, they may be replaced with plug welds.

Use of the repair bench is essential.

REPLACEMENT PART CONTENTS

Part supplied assembled with:
Rear side member closing element, connecting element
for bumper beam mounting
Captive screw M8-25
Rear towing bush Ø16

Renfort de fixation de traverse de choc arrière

PARTS CONCERNED (thickness in mm):

  1. Rear bumper beam mounting reinforcement 2

PART IN POSITION

Renfort de fixation de traverse de choc arrière

Test yourself

A quick Renault Megane quiz: every answer comes with an explanation and a link to the manual page.