Renault Megane Quiz
Bodywork

Rear floor, central section front crossmember

In this manual: Bodywork
Engine and peripherals — 141Chassis — 79Chassis — 72Renault Mégane III Driver's Manual — 87Electrical equipment — 221Engine and peripherals — 47Electrical equipment — 80Transmission — 14Air conditioning — 30Bodywork — 115Trim and upholstery — 44General vehicle information — 27Air conditioning — 59General vehicle information — 16Transmission — 38Sealing and soundproofing — 7General vehicle information — 3
4steps
~24min
2/5difficulty
Done 0 of 4

Replacing this part is complementary to replacing the rear side member for a side impact.

In the method described below, you will only find the descriptions and joins specific to the part concerned.

Information on related parts is covered in their respective sections (see contents).

Note: If the spot welds cannot be made with the spot welder, they may be replaced with plug welds.

REPLACEMENT PART CONTENTS

Part supplied assembled with:
Rear axle crossmember
Rear seat belt anchorage central reinforcement
M10 swaged nut
Nut plate

Traverse avant de plancher arrière partie centrale

PARTS CONCERNED (thickness in mm):

  1. Rear floor, central section front crossmember 1.2
  2. Rear seat belt anchorage central reinforcement 2
  3. Rear floor, front section 0.7
  4. Rear side member 1.6

PART IN POSITION

Traverse avant de plancher arrière partie centrale
Traverse avant de plancher arrière partie centrale

Test yourself

A quick Renault Megane quiz: every answer comes with an explanation and a link to the manual page.