Control panel

REMOVAL

• Disconnect the battery, starting with the negative terminal.

• Remove:

• the centre storage tray (if fitted),
• the Carminat system using tools (Ms. 1544) and (Ms. 1373) (if fitted),
• the radio using tool (Ms. 1373) (if fitted),
• the CD changer using tool (Ms. 1639) (if fitted).

• Disconnect the connectors.

• Remove:

• the lower centre fascia (1),
• the four fixing screws (2) of the centre fascia,
• the centre fascia (3).

• Unclip the card reader holder using tool (Car. 1597).
• Disconnect the connectors from the centre fascia.

• Remove the two fixing screws (4) of the heater control panel.

• Pull out the heater control panel, tilting it towards the inside of the dashboard.
• Disconnect the connector (5) from the heater control panel.

• Remove the cables from the heater control panel.
• Release (6).
• Spread the tab (7) apart.
• Pull out the ball joint (8).

INSTALLATION

• Pull out in the direction of removal.

• Take care not to damage the control cables during the operations.
• Connect the battery; carry out the necessary relearn procedures (Chapter Battery).

• the recirculation control cable is black,
• the distribution control cable is white,
• the mixing control cable is grey.
• The heater control panel cables do not require adjustment.

• Torque the battery cover screws (0.4 daN.m).