Body Electrical System
Overhead Console Lamp Repair Procedures
In this manual: Body Electrical System
6steps
~36min
2/5difficulty
Done 0 of 6
Inspection
- Remove the overhead console lamp assembly, then check continuity between the terminals. If continuity is not as specified, replace the map lamp switch.


Removal
- Disconnect the negative (-) battery terminal.
- Remove the mounting screws (2 pcs). Then remove the overhead console (A).

- Remove the overhead console after disconnecting the connector (A).

- Remove the overhead console lamp (B) by turning the socket.

Installation
- Install the overhead console lamp after connecting the connector.
- Install the lens by tightening the 2 screws.
Test yourself
A quick Hyundai Sonata LF quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?