Body Electrical System

Rheostat Repair Procedures

5steps
~30min
2/5difficulty
Done 0 of 5

Inspection

  1. Disconnect the negative (-) battery terminal.
  2. Remove the emergency pad lower panel. (Refer to Body - "Emergency Pad Lower Panel")
  3. Remove the lower hazard switch assembly (A) by disconnecting the mounting clip.
  4. Disconnect the dimmer switch connector (A).
  5. Check the voltage of the new rheostat switch. If the lamp brightness changes smoothly without flickering when the rheostat is turned, the rheostat is normal.

Test yourself

A quick Hyundai Sonata LF quiz: every answer comes with an explanation and a link to the manual page.