Room Lamp Repair Procedures

Removal

Room Lamp (without sunroof)

1. 1
   Disconnect the negative (-) battery terminal.
2. 2
   Using a screwdriver or removal tool, separate the room lamp lens (A) from the room lamp.

   Wear gloves to avoid cutting your hands. When removing with a flat-blade screwdriver or removal tool, wrap the tools with protective tape to prevent damage to components.

   

3. 3
   If the bulb must be replaced, remove the bulb (A) after disconnecting the room lamp lens.
4. 4
   Disconnect the room lamp (B) after loosening the mounting screws.

   

   When removing the room lamp, pay attention to the direction in which the tool is inserted. Be careful when inserting the tool in the opposite direction, as the room lamp may be damaged.

5. 5
   Remove the room lamp assembly after disconnecting the room lamp connector.
6. 6
   Disconnect the negative (-) battery terminal.
7. 7
   Separate the room lamp (B) from the headliner by disconnecting the mounting clip (A).

   

8. 8
   Separate the cosmetic lamp (B) from the headliner by disconnecting the mounting clip (A).

   

Room Lamp / Vanity Lamp

Installation

Room Lamp (without sunroof)

1. 1
   Install the room lamp after connecting the connector.
2. 2
   Install the room lamp lens.
3. 3
   Connect the negative (-) battery terminal.
4. 4
   Install the room lamp after connecting the connector.
5. 5
   Connect the negative (-) battery terminal.
6. 6
   Install the vanity lamp.
7. 7
   Connect the negative (-) battery terminal.

Room Lamp (sunroof) / Vanity Lamp