Installation

1. INSTALL STEREO COMPONENT TUNER ASSEMBLY

(a) Connect the 6 connectors to the radio and display receiver assembly or navigation receiver assembly and stereo component tuner assembly.

HINT:

Connect the connectors with white tape to the radio and display receiver assembly or navigation receiver assembly.

2. INSTALL NO. 2 RADIO BRACKET

3. INSTALL NO. 1 RADIO BRACKET

4. INSTALL HAZARD SWITCH WIRE

5. INSTALL RADIO AND DISPLAY RECEIVER ASSEMBLY WITH BRACKET (for Radio and Display Type)

6. INSTALL NAVIGATION RECEIVER ASSEMBLY WITH BRACKETS (for Navigation Receiver Type)

7. INSTALL HEATER CONTROL ASSEMBLY

8. INSTALL NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH

9. INSTALL NO. 1 INSTRUMENT CLUSTER FINISH PANEL GARNISH

10. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page ).

11. CHECK SRS WARNING LIGHT

(See page )