Vehicle Exterior

Motor LH Over Temperature (64,65)

~1min read
DESCRIPTION

When the side auto step controller ECU assembly detects the overheating in the system, it stops the operation of the automatic running board.

DTC No.

Detection Condition

Trouble Area

64

The side auto step motor assembly LH high temperature sensor circuit in the side auto step ECU functions.

  • Wire harness or connector
  • Side auto step controller ECU assembly

65

The side auto step motor assembly RH high temperature sensor circuit in the side auto step ECU functions.

PROCEDURE
  1. PERFORM COOL DOWN

(a) Do not operate the automatic running board in order to cool down the side auto step controller ECU assembly and side auto step motor assembly.

NEXT
  1. CHECK DTC

(a) Recheck for DTCs and check if the same DTC is output again.

OK:

No DTCs are output.


OK

END


NG

REPLACE SIDE AUTO STEP CONTROLLER ECU ASSEMBLY

Test yourself

A quick Toyota 4Runner quiz: every answer comes with an explanation and a link to the manual page.