ECU Terminals
ECU TERMINALS
INSPECT AIR CONDITIONING AMPLIFIER ASSEMBLY (TMMT Made)
(a) Disconnect the F72 connector from the air conditioning amplifier assembly.
(b) Measure the voltage and resistance according to the value(s) specified in the table below.
Tester Connection | Wire Color | Terminal Description | Condition | Specified Condition |
|---|---|---|---|---|
F72-5 (IG+) - Body ground |
B - Body ground |
Power supply (IG) |
Ignition Switch in ON position |
11 à 14 V |
Ignition Switch in OFF position |
Below 1 V |
|||
F72-1 (B) - Body ground |
V - Body ground |
Battery power supply |
Always |
11 à 14 V |
F72-29 (GND) - Body ground |
W-B - Body ground |
Ground |
Always |
Below 1 Ω |
(c) Reconnect the F72 connector to the air conditioning amplifier assembly.
(d) Measure the voltage according to the value(s) specified in the table below.
Tester Connection | Wire Color | Terminal Description | Condition | Specified Condition |
|---|---|---|---|---|
F72-24 (FDEF) - Body ground |
W - Body Ground |
Windshield deicer signal |
Ignition switch ON, windshield deicer switch ON |
Below 1 V |
Ignition switch ON, windshield deicer switch OFF |
11 à 14 V |
|||
F72-3 (LIN1) - Body ground |
L - Body ground |
LIN communication line |
Ignition Switch in ON position |
Pulse generation |
INSPECT AIR CONDITIONING AMPLIFIER ASSEMBLY (TMC Made)
(a) Disconnect the F139 connector from the air conditioning amplifier assembly.
(b) Measure the voltage and resistance according to the value(s) specified in the table below.
Tester Connection | Wire Color | Terminal Description | Condition | Specified Condition |
|---|---|---|---|---|
F139-2 (IG+) - Body ground |
B - Body ground |
Power supply (IG) |
Ignition Switch in ON position |
11 à 14 V |
Ignition Switch in OFF position |
Below 1 V |
|||
F139-1 (B) - Body ground |
V - Body ground |
Battery power supply |
Always |
11 à 14 V |
F139-4 (GND) - Body ground |
W-B - Body ground |
Ground |
Always |
Below 1 Ω |
(c) Reconnect the F139 connector to the air conditioning amplifier assembly.
(d) Measure the voltage according to the value(s) specified in the table below.
Tester Connection | Wire Color | Terminal Description | Condition | Specified Condition |
|---|---|---|---|---|
F139-17 (FDEF) - Body ground |
W - Body Ground |
Windshield deicer signal |
Ignition switch ON, windshield deicer switch ON |
Below 1 V |
Ignition switch ON, windshield deicer switch OFF |
11 à 14 V |
|||
F139-14 (LIN1) - Body ground |
BE - Body ground |
LIN communication line |
Ignition Switch in ON position |
Pulse generation |
CHECK AIR CONDITIONING CONTROL ASSY
(a) Check the pulses according to the value(s) shown in the table below.
Terminal No. (Symbol) | Wire Color | Terminal Description | Condition | Specified Condition |
|---|---|---|---|---|
F61-2 (LIN1) - F61-16 (GND) |
L - W-B*1 BE - W-B*2 |
LIN communication line |
Ignition Switch in ON position |
Pulse generation |
- *1: Manufactured by TMMT
- *2: Manufactured by TMC