How to Use Troubleshooting
PRECAUTION / NOTICE / HINT
HINT:
- Use the following procedure to troubleshoot the windshield deicer system.
- *: Use the Techstream.
PROCEDURE
VEHICLE BROUGHT TO WORKSHOP
|
CUSTOMER PROBLEM ANALYSIS
HINT:
- When troubleshooting, make sure the symptoms of the problem have been correctly identified. Any preconceptions must be set aside in order to make an accurate judgment. To clearly understand the actual symptoms of the problem, it is essential to ask the customer about the nature of the problem and the conditions under which it occurred.
- Gather as much information as possible for reference. Previous problems that do not appear related to the current problem may also be very useful in some cases.
- The following 5 elements are essential for analyzing the problem:
What
Vehicle model, system name
When
Date, time, frequency of occurrence
Where
Road conditions
What were the conditions?
Driving conditions, weather conditions
How did it happen?
Problem Symptoms
|
CHECK BATTERY
(a) Measure the battery voltage.
Standard voltage:
11 à 14 V
If the voltage is below 11 V, charge or replace the battery before proceeding to the next step.
(b) Check the fuses and relays.
(c) Using the Techstream, check the battery voltage drop history "Battery Control Count (Body ECU)" in the Data List.
Click here![]()
|
SYMPTOM TROUBLESHOOTING TABLE
(a) Refer to the Symptom Troubleshooting Table.
Click here
![]()
Result:
Result | Proceed to |
|---|---|
The malfunction is not listed in the Symptom Troubleshooting Table. |
A |
The malfunction is listed in the Symptom Troubleshooting Table. |
B |
| B | ADJUST, REPAIR OR REPLACE ACCORDING TO THE SYMPTOM TABLE |
|
GENERAL ANALYSIS AND TROUBLESHOOTING*
(a) Operation Check
Click here![]()
(b) ECU Terminals
Click here
![]()
(c) Data List/Active Test
Click here![]()
|
REPAIR OR REPLACE
|
CONFIRMATION TEST
| NEXT | END |