ECU Terminals
ECU TERMINALS
CHECK MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU) AND INSTRUMENT PANEL JUNCTION BLOCK ASSEMBLY
*A |
Main Body ECU (Multiplex Network Body ECU) with 1 connector |
- |
- |
*A |
Main Body ECU (Multiplex Network Body ECU) with 2 connectors |
- |
- |
(a) Disconnect the connectors from the main body ECU (Multiplex Network Body ECU).
Click here![]()
(b) Measure the voltage and resistance according to the value(s) specified in the table below.
HINT:
Measure the values at the wire harness side with the connector disconnected.
Terminal No. (Symbol) | Wire Color | Terminal Description | Condition | Specified Condition |
|---|---|---|---|---|
MB-31 (BECU) - Body ground |
- |
Battery power supply |
Always |
11 à 14 V |
MB-32 (IG) - Body ground |
- |
Ignition power supply (IG signal) |
Ignition switch ON → OFF |
11 to 14 V → Below 1 V |
MB-30 (ACC) - Body ground |
- |
Ignition power supply (ACC signal) |
Ignition switch ACC → OFF |
11 to 14 V → Below 1 V |
MB-11 (GND1) - Body ground |
- |
Ground |
Always |
Below 1 Ω |
MB-18 (DBKL) - Body ground |
- |
Driver seat belt buckle switch signal |
Driver seat belt buckled |
10 kΩ minimum |
Driver seat belt not buckled |
Below 1 Ω |
|||
MB-2 (RCTY) - Body ground |
- |
Rear RH door courtesy light switch input |
Rear LH door closed (OFF) |
10 kΩ minimum |
Rear LH door open (ON) |
Below 1 Ω |
|||
MB-13 (LCTY) - Body ground |
- |
Rear LH door courtesy light switch input |
Rear RH door closed (OFF) |
10 kΩ minimum |
Rear RH door open (ON) |
Below 1 Ω |
CHECK COMBINATION METER ASSEMBLY
(a) Disconnect the connector from the combination meter assembly F4.
(b) Measure the voltage and resistance according to the value(s) specified in the table below.
HINT:
Measure the values at the wire harness side with the connector disconnected.
Terminal No. (Symbol) | Wire Color | Terminal Description | Condition | Specified Condition |
|---|---|---|---|---|
F4-40 (B) - Body Ground |
SB - Body ground |
Battery power supply |
Always |
11 à 14 V |
F4-39 (IG+) - Body Ground |
P - Body ground |
IG power supply |
Ignition switch ON → OFF |
11 to 14 V → Below 1 V |
F4-21 (ET) - Body Ground |
W- B - Body ground |
Ground |
Always |
Below 1 Ω |
F4-7 (PKBI) - Body ground |
GR - Body ground |
Front passenger seat belt buckle switch signal |
Ignition switch ON, front passenger seat belt buckled and front passenger seat occupied |
10 kΩ minimum |
Ignition switch ON, front passenger seat belt not buckled and front passenger seat occupied |
Below 1 Ω |