How to Use Troubleshooting
PRECAUTION / NOTICE / HINT
HINT:
- Follow the procedure below to troubleshoot the seat belt reminder system.
- *: Use the Techstream.
PROCEDURE
VEHICLE BROUGHT TO WORKSHOP
|
CUSTOMER PROBLEM ANALYSIS
(a) Interview the customer to confirm the problem.
Click here
![]()
|
CHECK BATTERY VOLTAGE
(a) Measure the battery voltage.
Standard voltage:
11 à 14 V
If the voltage is below 11 V, charge or replace the battery before proceeding to the next step.
|
CHECK CAN COMMUNICATION SYSTEM FUNCTION*
(a) Using the Techstream, check whether the CAN communication system operates normally.
Click here
![]()
Result:
Result | Proceed to |
|---|---|
No CAN system DTCs are output |
A |
CAN-related DTCs are output |
B |
| B | GO TO CAN COMMUNICATION SYSTEM |
|
CHECK COMBINATION METER ASSEMBLY
(a) Check the operation of the speedometer and the shift position indicator light on the combination meter assembly.
OK:
The speedometer and shift position indicator light on the combination meter assembly operate normally.
| NG | GO TO METER/GAUGE SYSTEM |
|
SYMPTOM TROUBLESHOOTING TABLE
(a) Refer to the Symptom Troubleshooting Table.
Click here![]()
Result:
Result | Proceed to |
|---|---|
The malfunction is not listed in the Problem Symptoms Table |
A |
The malfunction is listed in the Problem Symptoms Table |
B |
| B | GO TO STEP 8 |
|
GENERAL ANALYSIS AND TROUBLESHOOTING*
(a) Data List/Active Test
Click here![]()
(b) ECU Terminals
Click here![]()
(c) Vehicle Check
Click here![]()
|
REPAIR OR REPLACE
|
CONFIRMATION TEST
| NEXT | END |