Seat Belt

Inspection On Vehicle

~4min read

INSPECTION ON VEHICLE

PROCEDURE

1. CHECK PASSENGER SEAT BELT REMINDER SYSTEM

HINT:

The seat belt warning light on the combination meter assembly is used for the driver seat and the front passenger seat.

(a) Turn the ignition switch to ON.

(b) Make sure that the seat belt reminder light flashes on the combination meter assembly when the driver seat belt is not buckled.

(c) Raise the vehicle using a swing arm type lift.

Click here

(d) Start the engine.

(e) If the driver seat belt is not buckled and the vehicle is driven at a speed of approximately 20 km/h or more, make sure that the seat belt warning light on the combination meter assembly flashes at 1.2 second intervals for 30 seconds.

Then, make sure that the seat belt reminder light on the combination meter assembly flashes at 0.4 second intervals.

(f) Make sure that the seat belt reminder light on the combination meter assembly turns off when the driver seat belt is buckled.

2. CHECK FRONT PASSENGER SEAT BELT REMINDER SYSTEM

HINT:

The seat belt warning light on the combination meter assembly is used for the driver seat and the front passenger seat.

(a) Turn the ignition switch to ON.

(b) Place a 20 kg (44.0 lb.) weight on the front passenger seat.

NOTICE:

Place the weight on the seat cushion and make sure it does not contact the seatback.

(c) Buckle the driver seat belt.

(d) Make sure that the seat belt warning light on the combination meter assembly flashes when the front passenger seat belt is not buckled.

(e) Raise the vehicle using a swing arm type lift.

Click here

(f) Start the engine.

(g) When the front passenger seat is occupied, the front passenger seat belt is not buckled and the vehicle is driven at a speed of approximately 20 km/h or more, make sure that the seat belt reminder light on the combination meter assembly flashes at 1.2 second intervals for 30 seconds.

Then, make sure that the seat belt reminder light on the combination meter assembly flashes at 0.4 second intervals.

3. CHECK SEAT BELT BUZZER

HINT:

The seat belt warning buzzer can be customized. Make sure that this function is enabled.

Click here

(a) Place a 20 kg (44.0 lb.) weight on the front passenger seat.

NOTICE:

Place the weight on the seat cushion and make sure it does not contact the seatback.

(b) Raise the vehicle using a swing arm type lift.

Click here

(c) Start the engine.

(d) Check that the seat belt reminder buzzer of the instrument cluster assembly sounds at 1.2-second intervals for 30 seconds.

(e) After the seat belt reminder buzzer has sounded at 1.2-second intervals for 30 seconds, check that the seat belt reminder buzzer of the instrument cluster assembly sounds at 0.4-second intervals for 90 seconds.

(f) Check that the seat belt reminder buzzer on the instrument cluster assembly stops 2 minutes after it started sounding at 1.2-second intervals.

(g) After the buzzer stops, turn the ignition switch OFF, then restart the engine. Drive the vehicle at approximately 20 km/h or more with the driver and front passenger seated and their seat belts unbuckled, and check that the buzzer sounds again.

(h) After the buzzer stops, buckle the driver and front passenger seat belts. Drive the vehicle at approximately 20 km/h or more, unbuckle the driver and front passenger seat belts, and check that the buzzer sounds again.

(i) Once the buzzer has stopped, stop the vehicle, move the shift lever to R, then to D. Drive the vehicle at approximately 20 km/h or more, then check that the buzzer sounds again.