Customizable Parameters
CUSTOMIZABLE PARAMETERS
NOTICE:
- When the customer requests a change to a function, first make sure that the function can be customized.
- Be sure to record the initial settings before customizing.
- When troubleshooting a function, first make sure that the function is set to its default value.
- These warning buzzers must remain enabled to ensure safe driving. Perform this procedure only if it is absolutely necessary to disable the warning buzzer (Disabled).
Customization using the Techstream
(a) Connect the Techstream to the DLC3.
(b) Turn the ignition switch to ON.
(c) Turn on the Techstream.
(d) Select the following menu items: Customize Setting / Warning.
(e) Select the setting by referring to the table below.
AlarmTester display | Description | Default setting | Setting | ECU |
|---|---|---|---|---|
Driver Side Seatbelt Warning Buzzer |
Function that sounds the driver seat belt reminder buzzer |
ON |
0 : OFF, 1 : ON |
Combination meter assembly |
Front Passenger Side Seatbelt Warning Buzzer |
Function that sounds the front passenger seat belt reminder buzzer |
ON |
0 : OFF, 1 : ON |
Combination meter assembly |
Rear Seatbelt Warning Buzzer |
Function that sounds the rear seat belt reminder buzzer* |
ON |
0 : OFF, 1 : ON |
Combination meter assembly |
- *: Although this item is displayed on the Techstream, it is not applicable to this vehicle.
HINT:
The setting is only valid when the vehicle is driven at 20 km/h or more.