Seat Belt

Data List / Active Test

~4min read

DATA LIST / ACTIVE TEST

DATA LIST

NOTICE:

In the following table, the values listed under "Normal Condition" are reference values. Do not rely solely on these reference values to determine whether a part is faulty or not.

HINT:

The Techstream Data List allows you to read the values or status of switches, sensors, actuators and other components without removing any parts. This non-intrusive check can be very useful, since intermittent conditions or signals can be identified before parts or wiring are moved. Reading the Data List during troubleshooting saves time in diagnosis.

(a) Connect the Techstream to the DLC3.

(b) Turn the ignition switch to ON.

(c) Turn on the Techstream.

(d) Select the following menu items: Body Electrical / Combination Meter or Main Body / Data List.

(e) Read the Data List by following the instructions on the Techstream.

Body Electrical > Combination Meter > Data List

Tester display

Item

Range

Normal Condition

Diagnostic Note

P-Seatbelt Buckle SW

Front passenger seat belt buckle switch signal

ON or OFF

ON: Front passenger seat belt unbuckled

OFF: Front passenger seat belt buckled

Perform the check while seated in the front passenger seat.

2nd-Row Seatbelt Buckle (R)

Rear right seat belt buckle switch signal*1

ON or OFF

ON: Rear right seat belt unbuckled

OFF: Rear right seat belt buckled

N/A

2nd-Row Seatbelt Buckle (L)

Rear left seat belt buckle switch signal*1

ON or OFF

ON: Rear left seat belt unbuckled

OFF: Rear left seat belt buckled

N/A

2nd-Row Seatbelt Buckle (C)

Rear center seat belt buckle switch signal*1

ON or OFF

ON: Rear center seat belt is not buckled.

OFF: Rear center seat belt buckled

N/A

Driver Side Seatbelt Warning Buzzer

Driver Side Seat Belt Reminder Buzzer

ON or OFF

Customized display value

-

P-Seatbelt Warning Buzzer

Front Passenger Seat Belt Reminder Buzzer

ON or OFF

Customized display value

-

Rear Seatbelt Warning Buzzer

Rear seat belt reminder buzzer*1

ON or OFF

Customized display value

N/A

*1: Although the item is displayed on Techstream, it is not applicable to this vehicle.

Body Electrical > Main Body > Data List

Tester display

Item

Range

Normal Condition

Diagnostic Note

RR Door Courtesy SW

Rear Right Door Threshold Light Switch

ON or OFF

ON: Right rear door open.

OFF: Right rear door closed.

-

RL Door Courtesy SW

Rear Left Door Threshold Light Switch

ON or OFF

ON: Left rear door open.

OFF: Left rear door closed.

-

D Seat Buckle SW

Driver Seat Belt Buckle Switch

ON or OFF

ON: Driver seat belt not fastened

OFF: Driver seat belt fastened

-

ACTIVE TEST

HINT:

Using the Techstream to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing parts. This non-intrusive functional check can be very useful, because intermittent operation can be identified before parts or wiring are moved. Performing Active Tests at the start of troubleshooting saves time during diagnosis. Data List information can be displayed during Active Tests.

(a) Connect the Techstream to the DLC3.

(b) Turn the ignition switch to ON.

(c) Turn on the Techstream.

(d) Select the following menu items: Body Electrical / Combination Meter / Active Test.

(e) Perform the Active Test by following the Techstream instructions.

Body Electrical > Combination Meter > Active Test

Tester display

Item

Control Range

Diagnostic Note

Driver Side Seat Belt

Seat belt reminder light

OFF / ON

-