How to Use Troubleshooting
PRECAUTION / NOTICE / HINT
HINT:
- Follow the procedure below to troubleshoot the glass defogger system.
- *: Use the Techstream.
PROCEDURE
VEHICLE BROUGHT TO WORKSHOP
|
CUSTOMER PROBLEM ANALYSIS
HINT:
- When troubleshooting, make sure the symptoms of the problem have been correctly identified. Any preconceptions must be set aside in order to make an accurate judgment. To clearly understand the actual symptoms of the problem, it is essential to ask the customer about the nature of the problem and the conditions under which it occurred.
- Gather as much information as possible for reference. Previous problems that do not appear related to the current problem may also be very useful in some cases.
- The following 5 elements are essential for analyzing the problem:
What
Vehicle model, system name
When
Date, time, frequency of occurrence
Where
Road conditions
What were the conditions?
Driving conditions, weather conditions
How did it happen?
Problem Symptoms
|
PRELIMINARY CHECKS
(a) Measure the battery voltage.
Standard voltage:
11 à 14 V
If the voltage is below 11 V, charge or replace the battery before proceeding to the next step.
(b) Check the fuses and relays.
(c) Check the connectors and terminals for any abnormality, such as loose connections, deformation, etc.
|
SYMPTOM TROUBLESHOOTING TABLE
(a) Refer to the Symptom Troubleshooting Table.
Click here
![]()
Result:
Result | Proceed to |
|---|---|
The malfunction is not listed in the Problem Symptoms Table |
A |
The malfunction is listed in the Problem Symptoms Table |
B |
| B | GO TO STEP 6 |
|
GENERAL ANALYSIS AND TROUBLESHOOTING*
(a) Operation Check
Click here![]()
(b) ECU Terminals
Click here
![]()
(c) Data List/Active Test
Click here![]()
(d) Vehicle Inspection
Click here![]()
|
REPAIR OR REPLACE
|
CONFIRMATION TEST
| NEXT | END |