Windows

Data List / Active Test

~1min read

DATA LIST / ACTIVE TEST

ACTIVE TEST

HINT:

Using the Techstream to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing parts. This non-intrusive functional check can be very useful, because intermittent operation can be identified before parts or wiring are moved. Performing Active Tests at the start of troubleshooting saves time during diagnosis. Data List information can be displayed during Active Tests.

(a) Connect the Techstream to the DLC3.

(b) Turn the ignition switch to ON.

(c) Turn on the Techstream.

(d) Select the following menu items: Body Electrical / Air Conditioner / Active Test.

(e) Perform the Active Test by following the Techstream instructions.

Body Electrical > Air Conditioner > Active Test

Tester display

Item

Control Range

Diagnostic Note

Defogger Relay (Rear)

Rear Defogger Wire Harness

OFF or ON

-