Seat Belt

How to Use Troubleshooting

~2min read

PRECAUTION / NOTICE / HINT

HINT:

  • Follow the procedure below to troubleshoot the seat belt reminder system.
  • *: Use the Techstream.

PROCEDURE

  1. VEHICLE BROUGHT TO WORKSHOP

NEXT
  1. CUSTOMER PROBLEM ANALYSIS

(a) Ask the customer to confirm the problem.

Click here

NEXT
  1. PRELIMINARY CHECKS

(a) Measure the battery voltage.

Standard voltage:

11 à 14 V

If the voltage is below 11 V, charge or replace the battery before proceeding to the next step.

(b) Check the fuses and relays.

(c) Check the connectors and terminals for any abnormality, such as loose connections, deformation, etc.

NEXT
  1. CHECK CAN COMMUNICATION SYSTEM FUNCTION*

(a) Using the Techstream, check for DTCs related to the CAN communication system.

Click here

Result:

Result

Proceed to

No CAN system DTCs are output

A

CAN-related DTCs are output

B

B

GO TO CAN COMMUNICATION SYSTEM

A
  1. CHECK FOR DTC OUTPUT (AIRBAG SYSTEM)*

(a) Clear the DTCs.

Click here

Body Electrical > SRS Airbag > Clear DTCs

(b) Check DTCs.

Click here

Body Electrical > SRS Airbag > Trouble Codes

Result:

Result

Proceed to

No DTCs are output

A

DTCs are output

B

B

GO TO AIRBAG SYSTEM

A
  1. CHECK FOR DTC OUTPUT (OCCUPANT CLASSIFICATION SYSTEM)*

(a) Clear the DTCs.

Click here

Body Electrical > Occupant Detection > Clear DTCs

(b) Check DTCs.

Click here

Body Electrical > Occupant Detection > Trouble Codes

Result:

Result

Proceed to

No DTCs are output

A

DTCs are output

B

B

GO TO OCCUPANT CLASSIFICATION SYSTEM

A
  1. CHECK COMBINATION METER ASSEMBLY

(a) Check that the speedometer, shift position indicator and brake warning light on the instrument cluster assembly operate.

OK:

The speedometer, shift position indicator and brake warning light on the instrument cluster assembly operate normally.

NG

GO TO METER/GAUGE SYSTEM

OK
  1. SYMPTOM TROUBLESHOOTING TABLE

(a) Refer to the Symptom Troubleshooting Table.

Click here

Result:

Result

Proceed to

The malfunction is not listed in the Problem Symptoms Table

A

The malfunction is listed in the Problem Symptoms Table

B

B

GO TO STEP 10

A
  1. GENERAL ANALYSIS AND TROUBLESHOOTING*

(a) Data List/Active Test

Click here

(b) ECU Terminals

Click here

(c) Vehicle Check

Click here

NEXT
  1. REPAIR OR REPLACE

NEXT
  1. CONFIRMATION TEST

NEXT

END