Seat Belt

Customizable Parameters

~1min read

CUSTOMIZABLE PARAMETERS

CUSTOMIZE SEAT BELT REMINDER SYSTEM

HINT:

The following items can be customized:

NOTICE:

  • When the customer requests a change to a function, first make sure that the function can be customized.
  • Be sure to record the initial settings before customizing.
  • When troubleshooting a function, first make sure that the function is set to its default value.
  • These warning buzzers must remain enabled to ensure safe driving. Perform this procedure only if it is absolutely necessary to disable the warning buzzer (Disabled).

(a) Customizing using the Techstream

(1) Connect the Techstream to the DLC3.

(2) Turn the ignition switch ON.

(3) Turn on the Techstream.

(4) Select the following menus: Customize Setting / Warning.

(5) Select the setting by referring to the table below.

Alarm

Tester display

Description

Default setting

Setting

ECU

Driver Side Seatbelt Warning Buzzer

Enables the driver seat belt warning buzzer.

ON

0 : OFF, 1 : ON

Combination meter assembly

Front Passenger Side Seatbelt Warning Buzzer

Enables the front passenger seat belt warning buzzer.

ON

0 : OFF, 1 : ON

Combination meter assembly

Rear Seatbelt Warning Buzzer

Enables the rear seat belt warning buzzer.

ON

0 : OFF, 1 : ON

Combination meter assembly

HINT:

These settings are only effective when the vehicle is driven at a speed of 20 km/h or more.