Data List / Active Test
DATA LIST / ACTIVE TEST
DATA LIST
HINT:
The Techstream Data List allows you to read the values or status of switches, sensors, actuators and other components without removing any parts. This non-intrusive check can be very useful, since intermittent conditions or signals can be identified before parts or wiring are moved. Reading the Data List during troubleshooting saves time in diagnosis.
NOTICE:
In the following table, the values listed under "Normal Condition" are reference values. Do not rely solely on these reference values to determine whether a part is faulty or not.
(a) Connect the Techstream to the DLC3.
(b) Turn the ignition switch to ON.
(c) Turn on the Techstream.
(d) Select the following menu items: Body Electrical / Combination Meter, Main Body, Occupant Detection or SRS Airbag / Data List.
(e) Read the Data List by following the instructions on the Techstream.
Body Electrical > Combination Meter > Data ListTester display | Item | Range | Normal Condition | Diagnostic Note |
|---|---|---|---|---|
2nd-Row Seatbelt Buckle (R) |
Rear RH Seat Belt Buckle Switch Signal |
ON or OFF |
OFF: Rear right seat belt buckled ON: Rear right seat belt unbuckled |
- |
2nd-Row Seatbelt Buckle (L) |
Rear LH Seat Belt Buckle Switch Signal |
ON or OFF |
OFF: Rear left seat belt buckled ON: Rear left seat belt unbuckled |
- |
2nd-Row Seatbelt Buckle (C) |
Rear Center Seat Belt Buckle Switch Signal |
ON or OFF |
OFF: Rear center seat belt buckled ON: Rear center seat belt is not buckled. |
- |
Driver Side Seatbelt Warning Buzzer |
Driver Side Seat Belt Reminder Buzzer |
ON or OFF |
Customised setting displayed |
- |
P-Seatbelt Warning Buzzer |
Front Passenger Seat Belt Reminder Buzzer |
ON or OFF |
Customised setting displayed |
- |
Rear Seatbelt Warning Buzzer |
Rear Seat Belt Reminder Buzzer |
ON or OFF |
Customised setting displayed |
- |
Tester display | Item | Range | Normal Condition | Diagnostic Note |
|---|---|---|---|---|
Passenger Buckle SW |
Front Passenger Seat Belt Buckle Switch |
Unset, Set or NG |
Unset: Seat belt unbuckled Set: Seat belt buckled NG: Data not identified |
- |
Tester display | Item | Range | Normal Condition | Diagnostic Note |
|---|---|---|---|---|
Left side Buckle SW |
Left Side Buckle Switch |
Unset, Set or NG |
Unset: Seat belt unbuckled Set: Seat belt buckled NG: Data not identified |
- |
Right side Buckle SW |
Right Side Buckle Switch |
Unset, Set or NG |
Unset: Seat belt unbuckled Set: Seat belt buckled NG: Data not identified |
- |
Tester display | Item | Range | Normal Condition | Diagnostic Note |
|---|---|---|---|---|
RR Door Courtesy SW |
Rear Right Door Threshold Light Switch |
ON or OFF |
ON: Right rear door open. OFF: Right rear door closed. |
- |
RL Door Courtesy SW |
Rear Left Door Threshold Light Switch |
ON or OFF |
ON: Left rear door open. OFF: Left rear door closed. |
- |
D Seat Buckle SW |
Driver Seat Belt Buckle Switch |
ON or OFF |
ON: Driver seat belt not fastened OFF: Driver seat belt fastened |
- |
ACTIVE TEST
Using the Techstream to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing parts. This non-intrusive functional check can be very useful, because intermittent operation can be identified before parts or wiring are moved. Performing Active Tests at the start of troubleshooting saves time during diagnosis. Data List information can be displayed during Active Tests.
(a) Connect the Techstream to the DLC3.
(b) Turn the ignition switch to ON.
(c) Turn on the Techstream.
(d) Select the following menu items: Body Electrical / Combination Meter / Active Test.
(e) Perform the Active Test by following the Techstream instructions.
Body Electrical > Combination Meter > Active TestTester display | Item | Control Range | Diagnostic Note |
|---|---|---|---|
Driver Side Seat Belt |
Front Seat Belt Reminder Light |
ON or OFF |
- |
Rear Seat Belt |
Rear Seat Belt Reminder Light |
ON or OFF |
- |