Driving the vehicle
It is essential to follow the procedures below to drive safely:
Driving
Multidrive transmission
1. Depress the brake pedal and, keeping it depressed, shift the shift lever to D.
2. Release the parking brake.
If the parking brake is in automatic mode, it releases automatically when the shift lever is moved to a position other than P.
3. Gradually release the brake pedal and gradually depress the accelerator pedal to set the vehicle in motion.
Manual transmission
1. Depress the clutch pedal and, keeping it depressed, shift the shift lever to 1.
2. Release the parking brake.
If the parking brake is in automatic mode, it releases automatically when you depress the accelerator pedal.
3. Gradually release the clutch pedal. At the same time, gradually depress the accelerator pedal to set the vehicle in motion.
Stopping
Multidrive transmission
1. Shift lever in D, depress the brake pedal.
2. If necessary, apply the parking brake.
If the vehicle must remain stopped for an extended period, shift the shift lever to P or N.
Manual transmission
1. While depressing the clutch pedal, depress the brake pedal.
2. If necessary, apply the parking brake.
If the vehicle must remain stopped for an extended period, shift the shift lever to N. Vehicles equipped with a Stop & Start system: If you shift the shift lever to N and release the clutch pedal while the Stop & Start system is active, the engine stops.
Parking the vehicle
Multidrive transmission
1. Shift lever in D, depress the brake pedal.
2. Apply the parking brake and shift the shift lever to P. If the parking brake is in automatic mode, it applies automatically when you shift the shift lever to P. If parking on a slope, chock the wheels as necessary.
3. Vehicles without a "smart entry & start" system: Turn the anti-theft start switch to "LOCK" to stop the engine.
Vehicles equipped with a "smart entry & start" system: Press the start switch to stop the engine.
4. Lock the door, making sure you have the key with you.
Manual transmission
1. While depressing the clutch pedal, depress the brake pedal.
2. Apply the parking brake. If the parking brake is in automatic mode, it applies automatically when you stop the engine.
3. Shift the shift lever to N. If parking on a slope, shift the shift lever to 1 or R and chock the wheels as necessary.
4. Vehicles without a "smart entry & start" system: Turn the anti-theft start switch to "LOCK" to stop the engine.
Vehicles equipped with a "smart entry & start" system: Press the start switch to stop the engine.
5. Lock the door, making sure you have the key with you.
Starting on a steep slope
Multidrive transmission
1. Depress the brake pedal and, keeping it depressed, shift the shift lever to D.
2. Pull up the parking brake pedal to apply the parking brake manually.
3. Release the brake pedal and gradually depress the accelerator pedal to set the vehicle in motion.
4. Press the parking brake switch to release the parking brake manually.
Manual transmission
1. Depress the brake pedal and the clutch pedal fully to the floor and, keeping them depressed, shift the shift lever to 1.
2. Pull up the parking brake pedal to apply the parking brake manually.
3. Lightly depress the accelerator pedal while gradually releasing the clutch pedal.
If the parking brake is in automatic mode, it releases automatically when you depress the accelerator pedal.
4. Press the parking brake switch to release the parking brake manually.
■ When starting on a slope The hill start assist function operates.
■ Driving in rain
- Drive carefully in the rain, as visibility is reduced, the windows tend to fog up, and the road surface is slippery.
- Drive carefully when it starts to rain, as the road is especially slippery at that time.
- On highways, avoid driving at high speed in rainy conditions. Water may form a film between the tires and the road surface that is thick enough to eliminate steering and braking effectiveness.
■ Engine speed while driving (vehicles with Multidrive transmission) Under the following conditions, the engine speed may reach high values while the vehicle is being driven. This is caused by automatic upshift control or downshifting to respond to driving conditions. It does not indicate sudden acceleration.
- The system determines that the vehicle is climbing or descending a slope.
- When you release the accelerator pedal.
- When you depress the brake pedal while Sport mode is selected.
■ Engine power restriction (Brake Override System)
- Depressing the brake pedal and accelerator pedal at the same time may restrict engine power.
- A warning message appears on the multi-information display when the system is operating.
■ Sudden start restriction (drive-off protection) (vehicles with Multidrive transmission)
- Performing the following unusual operations may restrict engine power.
- If you shift the shift lever from R to D, D to R, N to R, P to D, or P to R (including D and M) while depressing the accelerator pedal, a warning message appears on the multi-information display.
- If you depress the accelerator pedal too far while the vehicle is in reverse.
- While drive-off protection is active, it may be difficult for your vehicle to get free from mud or fresh snow. In this case, turn off the TRC system to deactivate drive-off protection so the vehicle can get free from mud or fresh snow.
■ Break-in period for your new Toyota To extend the service life of your vehicle, the following precautions are recommended:
- During the first 300 km (186 miles): Avoid sudden stops.
- During the first 800 km (500 miles): Do not tow a trailer or caravan.
- During the first 1000 km (621 miles):
- Do not drive at extreme speeds.
- Avoid sudden acceleration.
- Do not drive in the lower gears for extended periods.
- Do not maintain a constant speed for too long.
■ Using your vehicle abroad Observe the regulations in force concerning vehicle registration, and make sure you can find the fuel you need.
■ Idling time before stopping the engine* To prevent damage to the turbocharger, let the engine idle after driving at high speed or in mountainous areas.
| Driving condition | Idling time |
| Normal city driving or spirited driving (at the speed limit on highways or the recommended speed) | Not necessary |
| Driving in mountains under continuous load (on unpaved roads, etc.), or towing a trailer/caravan | Approximately 1 minute |
*: Unless the Stop & Start system operates
WARNING Observe the following precautions.Failure to do so could result in serious or fatal injury.
■ When starting the vehicle (vehicles with Multidrive transmission) Always keep your foot on the brake pedal when the vehicle is stopped with the engine running. This prevents the vehicle from creeping forward.
WARNING Observe the following precautions.Failure to do so could result in serious or fatal injury.
■ When driving the vehicle
- Do not drive unless you are familiar with the locations of the brake and accelerator pedals, so you do not press the wrong pedal.
- Accidentally pressing the accelerator pedal instead of the brake pedal causes sudden acceleration, which may lead to an accident.
- When reversing, you may need to turn around, which may make it difficult to operate the pedals.
Make sure you can operate the pedals properly.
- Always adopt a correct driving position, even for short trips. This allows you to operate the brake and accelerator pedals properly.
- Use your right foot to depress the brake pedal. If you use your left foot to depress the brake pedal, you may react too slowly in an emergency, which may lead to an accident.
- Do not drive over flammable materials, and do not park near them.
The exhaust system and exhaust gases can be very hot. These hot parts may cause a fire if flammable materials are nearby.
- During normal driving, do not stop the engine. Stopping the engine while the vehicle is moving does not cause loss of steering or braking control, but these systems are no longer power-assisted. This makes steering and braking more difficult, so it is recommended to park the vehicle at the roadside as soon as you can do so safely.
However, in an emergency, such as when it is impossible to stop the vehicle normally,
- When driving down a steep slope, use engine braking (downshift) to keep control of your speed.
Continuous use of the brakes may cause them to overheat and lose effectiveness.
- Do not adjust the steering wheel, seat, or inside and outside rearview mirror positions while driving.
You could lose control of the vehicle.
- Always make sure that no passenger is seated in a way that any part of their body (arms, head, etc.) extends outside the vehicle.
- Do not use the vehicle off-road.
This is not a 4WD vehicle designed for real off-road use.
Exercise extreme caution if you cannot avoid driving off-road.
- Do not drive through a river or other bodies of water.
This may cause short circuits in electrical/electronic components, engine damage, or serious damage to the vehicle.
Failure to do so could result in serious or fatal injury.
■ When driving on slippery roads
- Any sudden braking, accelerating, or steering input may cause the tires to lose grip enough to reduce your ability to control the vehicle.
- Any sudden acceleration, downshifting that causes significant engine braking, or change in engine speed may cause the vehicle to lose traction.
- After driving through deep water, lightly depress the brake pedal to check that the brakes are working properly. When wet, the brake pads may cause the brakes to perform poorly. If the brakes are wet and only one side is braking effectively, the vehicle may pull or behave unpredictably when changing direction.
■ When operating the shift lever
- On vehicles equipped with a Multidrive transmission, do not allow the vehicle to roll backward while the shift lever is in a forward driving position, or move forward while it is in R.
The engine may stall, or the brake and steering assist may not be sufficient, which may result in an accident or damage to the vehicle.
- On vehicles equipped with a Multidrive transmission, do not shift into P while the vehicle is moving.
This may damage the transmission and you may lose control of the vehicle.
- Do not shift into R while the vehicle is moving forward.
This may damage the transmission and you may lose control of the vehicle.
- Do not shift into a forward driving position while the vehicle is moving backward.
This may damage the transmission and you may lose control of the vehicle.
- Shifting into N while the vehicle is moving disconnects the transmission from the engine. Engine braking is not available when N is selected.
- On vehicles equipped with a Multidrive transmission, be careful not to move the shift lever while pressing the accelerator pedal.
If you move the shift lever to any position other than P or N, the vehicle may accelerate suddenly and unexpectedly, which may cause a serious or fatal accident.
Failure to do so could result in serious or fatal injury.
■ If you hear a squealing or grinding noise (brake pad wear indicators) Have the brake pads inspected and replaced as soon as possible by a Toyota dealer, an authorized Toyota repairer, or any reliable repair shop.
The brake discs may be damaged if the pads are not replaced in time.
It is dangerous to drive the vehicle when the wear limits of the brake pads and/or brake discs have been exceeded.
■ When the vehicle is stopped
- Do not race the engine.
If the vehicle is in gear with the shift lever in any position other than P (Multidrive transmission) or N, it may move off suddenly and unexpectedly, causing an accident.
- On vehicles equipped with a Multidrive transmission, to prevent an accident caused by the vehicle rolling backward, always keep your foot on the brake pedal while the engine is running, and use the parking brake as needed.
- If the vehicle is stopped on a slope or hill, to prevent an accident caused by it moving forward or backward, always keep your foot on the brake pedal and firmly apply the parking brake as needed.
- Avoid racing or revving the engine.
Running the engine at high speed while the vehicle is stationary may cause the exhaust system to overheat, and may cause a fire if flammable material is nearby.
Failure to do so could result in serious or fatal injury.
■ When the vehicle is parked
The following consequences may occur:
- The temperature inside the vehicle may cause plastic lenses and the synthetic frame of eyeglasses to warp or crack.
- Soft drink cans may explode and spray their contents inside the passenger compartment, causing a short circuit in the vehicle's electrical equipment.
- Do not attach adhesive discs to the windshield or windows. Do not place diffusers, such as air fresheners, on the instrument panel or dashboard. Adhesive discs or diffusers can act as a magnifying glass and cause a fire inside the vehicle.
- Do not leave a door or window open if the curved glass is coated with a metallic film, such as silver-colored film. Reflected sunlight may cause the glass to act as a magnifying glass and start a fire.
- Always firmly apply the parking brake, shift the shift lever to P (Multidrive transmission), stop the engine, and lock the vehicle.
Do not leave the vehicle unattended while the engine is running.
Vehicles equipped with a Multidrive transmission: If the vehicle is parked with the shift lever in P but the parking brake is not applied, the vehicle may move and possibly cause an accident.
- Do not touch the exhaust pipes while the engine is running, or immediately after it has been stopped.
You may burn yourself.
Failure to do so could result in serious or fatal injury.
■ When taking a break in the vehicle Always stop the engine. Otherwise, if you accidentally bump the shift lever or press the accelerator pedal, an accident or fire could result from engine overheating. In addition, if the vehicle is parked in a poorly ventilated area, exhaust gas may accumulate and enter the cabin, causing serious health problems or death.
■ When braking
- When the brakes are wet, drive with extra caution.
Braking distances increase when the brakes are wet, and this may cause uneven braking between the left and right sides of the vehicle. The parking brake may also fail to hold the vehicle completely still.
- If the brake assist is not working, do not follow other vehicles too closely, and avoid downhill slopes or sharp corners where braking is required.
In this case, braking is still possible, but you will need to press the brake pedal harder than usual. Braking distance will also increase. Have the brakes of your vehicle repaired immediately.
- Do not pump the brake pedal if the engine stalls.
Each press of the brake pedal uses up the vacuum reserve of the brake booster.
- The brake system consists of 2 separate hydraulic circuits. If one of the circuits fails, the other will still work. In this case, you will need to press the brake pedal harder than usual, and braking distance will increase. Have the brakes of your vehicle repaired immediately.
■ If the vehicle is stuck (4WD models) Do not spin the wheels excessively when they are not in contact with the ground, or when the vehicle is stuck in mud or sand, etc. This may damage the drivetrain components or cause the vehicle to suddenly lurch forward or backward, resulting in an accident.
NOTE■ When driving the vehicle (vehicles equipped with Multidrive transmission)
- Do not press the accelerator and brake pedals at the same time while the vehicle is moving, as this may reduce engine power.
- Do not accelerate or press the accelerator and brake pedals at the same time to keep the vehicle from rolling backward on an uphill slope.
■ When driving the vehicle (vehicles equipped with a manual transmission)
- Do not press the accelerator and brake pedals at the same time while the vehicle is moving, as this may reduce engine power.
- Do not shift gears without first fully depressing the clutch pedal. After shifting gears, do not release the clutch pedal too quickly. This may damage the clutch, transmission and gear teeth in the transmission.
- Follow the recommendations below to avoid damaging the clutch.
- Do not rest your foot on the clutch pedal while the vehicle is moving.
This may cause clutch problems.
- Use only first gear to start and drive forward.
Otherwise, the clutch may be damaged.
- Do not hold the vehicle on a slope using the clutch.
Otherwise, the clutch may be damaged.
- Do not rest your foot on the clutch pedal while the vehicle is moving.
- Do not shift the shift lever into R while the vehicle is still moving. This may damage the clutch, transmission and gear teeth in the transmission.
■ When parking the vehicle (vehicles equipped with Multidrive transmission) Always apply the parking brake and shift the shift lever into P. Otherwise, the vehicle may move or accelerate suddenly if you accidentally press the accelerator pedal.
■ To avoid mechanical problems
- Do not hold the steering wheel at full lock to the right or left for extended periods.
This may damage the electric power steering motor.
- When you must drive over an obstacle on the road, drive as slowly as possible to avoid damaging the wheels, underbody, etc.
- Be sure to let the engine idle immediately after driving under heavy load. Stop the engine only after the turbocharger has cooled down.
Otherwise, the turbocharger may be damaged.
■ If a tire goes flat while driving A flat or damaged tire may cause the following. Hold the steering wheel firmly and gradually press the brake pedal to slow the vehicle.
- You may have difficulty controlling the vehicle.
- The vehicle may produce abnormal noises or vibrations.
- The vehicle may lean abnormally.
Information on what to do in the event of a flat tire.
■ When approaching a flooded road Do not drive onto a road flooded by heavy rain, etc. Doing so may cause serious damage to the vehicle:
- Engine stalling
- Short circuit in electrical equipment
- Engine damage caused by water immersion
If you have driven on a flooded road and the vehicle has been submerged, have the following items checked by a Toyota dealer, an authorized Toyota repairer, or any reliable repairer:
- Brake operation
- Quality and quantity of the oil and lubricants used in the engine, transmission, transfer case (4WD models), rear differential (4WD models), etc.
- Lubrication condition of the propeller shaft (4WD models), bearings and suspension joints (where possible), and operation of all joints, bearings, etc.